Peugeot 308 Key Fob Problems and How to Fix Them
If your Peugeot 308 key fob stopped working one day it could be due to a dead battery in the coin, water damage the receiver module or a malfunctioning electronic chip. Luckily, all of these are easy to fix and you'll get your car back to normal in no time!
The key blade may become worn-out and cause a faulty car key. It is easy to solve this issue by visiting your local Car Key Man Auto Locksmith to replace the blade.
Battery
The battery that powers the key fob on your Peugeot 308 can sometimes die or become too weak to send an energizing signal to the car. This could cause the key fob to cease working, preventing you from locking or opening the doors or even starting your engine. You'll require a new battery for your key fob to correct this.
You can buy a brand new battery at an auto parts store or at your local hardware store. When you purchase the battery, ensure that it's new and hasn't sat on the shelf for a long time. peugeot 207 car key has greater capacity and will transmit a stronger signal your vehicle.
After replacing the battery, try unlocking the doors and locking them using the key fob. If the doors don't unlock, the problem is likely with the car's receiver module which can be programmed by your local Peugeot dealer.
It's also possible that the chip inside your key fob is damaged. You could cause damage to your key fob when you drop it on the ground or expose it to water. The rubber seals that protect the chip from moisture may get worn out over time, particularly if the key fob is exposed to water for lengthy periods of time, such as submerging it in the ocean at the beach. To prevent this from happening it is recommended to keep your key fob out of water and out of water.
Water Damage
Don't give up on your key fob when it gets wet, regardless of whether you dropped it in the pool or slipped into a Puddle. The key fob is protected by rubber seals however, prolonged exposure to water may affect the electronic chip. Since water is a good conductor, any water that is able to get inside the key fob can cause a series of short circuits that will eventually damage the chip. After removing the batteries, clean the contacts using isopropyl and then dry them completely before putting them back into.
Your Peugeot 308 may not start because of the battery being dead. Jumper cables are a great option to restart the engine in case you have an extra car. If the battery is the issue and it is not working, it should be replaced.
Another possible cause is an ineffective receiver in the vehicle, which can block the signal from the key fob. The key fob could be damaged or there may be an issue with the antenna, wiring or the key fob itself. If you're using a new key fob it may need to be programmed to your vehicle. If you are unable to solve the issue yourself, contact an expert technician. A trained technician will be able to find the issue quickly and correct it swiftly.
Radio Interference
For example, a key fob not being recognized or having a restricted range typically indicate that there is an interference in the system. The interference can be transmitted or radiated the latter caused by power and speaker cables that are too close to electrical components. Generally, rerouting the cables or moving them away from the components may resolve the issue.
It's unlikely that someone is monitoring your key fob's signals to steal your car, but it's possible that your signal has been masked by radio frequency interference. This is an easy issue to resolve.
If you're having issues with your keys that are not recognized, try using an entirely new battery. Also, ensure that the battery is the right size and type. Incorrectly sized batteries can damage the fob.
These devices may interfere with the key signal if they use the same radio frequency. It is recommended to avoid having these devices attached to your key fob.
Pairing Issues
A car's remote keyless entry system is an antenna that receives radio frequency signals from the key fob. If the receiver is experiencing issues, you will not be able to start your car even if your key fob is working and is changed. The issue can be caused by a range of things, including the dead battery in the coin and water damage. The receiver could also be malfunctioning as a result of an error in the software or internal damage to the key itself.
The coin battery in your Peugeot 308 keyfob has likely failed. The battery can be easily replaced, but you must ensure that it's the correct battery for your key fob. It is best to use batteries that are the same size, voltage, and specification as the original.
Your Peugeot 308 keyfob may not function if it was paired with another vehicle. This can happen if have given your key fob to a friend or when the key has been used to unlock and begin other vehicles. This can be resolved by reprogramming the key fob with an OBDII scanner. This tool will request information about your car, like its VIN or engine type. It is crucial that you enter the correct details.